Sanitizing - Sanitizing
IGIENIX X-TREME SPRAY [new]
Cleaner for interior and exterior wall surfaces attacked by mould and algae. To be used as Phase 1 in the treatment of mould and algae with the Igienix X-Treme cycle. Cleans and cleanses walls with fast action. Temporary effect when applied on small surfaces to restore the original appearance, but without overpainting.
Use: exteriors-interiors
Tools: spray
Diluition: ready to use
Spreading Rate: 4-6 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
IGIENIX X-TREME DETERGENTE [new]
Detergent for interior and exterior wall surfaces, suitable for the protection of surfaces subject to mould and algae growth. To be used as Phase 2 in the treatment of mould and algae with the Igienix X-Spray cycle. It penetrates deeply and has a long-lasting action, helping the paint subsequently applied to preserve its original appearance.
Use: exteriors-interiors
Tools: brush-roller
Diluition: ready to use
Spreading Rate: 8-10 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
IGIENIX X-TREME ANTICONDENSA [NEW]
Anti-condensation thermal effect restorative paint for interiors, formulated with 3M hollow glass bubbles with a low thermal transmission coefficient. Igienix X-Treme Anticondensa not only reduces surface condensation in cold areas of rooms (thermal bridges), but also has a high broad-spectrum and long-lasting mould-protecting action. Suitable for rooms subject to heavy vapour condensation and with special hygienic requirements such as bathrooms, kitchens, sports changing rooms, cellars, etc. Classified indoor Air Quality: A+ CAM Indoor, formaldehyde free.
Use: interiors
Tools: brush-roller
Diluition: with water
Spreading Rate: 6-8 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
IGIENIX X-TREME LAVABILE [new]
Washable restorative paint for interiors, particularly suitable for interiors subject to high humidity and prone to formation of mould. For its particular composition with low level of volatile organic compounds (VOC) it is suitable for painting and protection from mould in environments such as bathrooms, kitchens, schools, cellars, sports changing rooms, etc. Igienix X-Treme Lavabile is characterized by high coverage power and leaves the surface opaque, soft and easy to clean. Certificated class A+, CAM, Indoor, formaldehyde free. Resistant to mould according to the norm UNI 15457:2014.
Use: interiors
Tools: brush-roller-spray
Diluition: with water
Spreading Rate: 12-14 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
IGIENIX X-TREME TRASPIRANTE [new]
Breathable restorative paint for interiors, particularly suitable for interiors subject to high humidity and prone to formation of mould. Resistant to mould proliferation and characterized by high permeability to water vapour. Certificated class A+, CAM, Indoor, formaldehyde free. Resistant to mould according to the norm UNI 15457:2014.
Use: interiors
Tools: brush-roller-spray
Diluition: with water
Spreading Rate: 10-12 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
IGIENIX X-TREME ADDITIVO [NEW]
Antimould additive for use in Igienix X-Treme line paints to enhance their effect and in interior paints to impart mould-preventing properties, preserving their appearance over time and ensuring hygienic conditions in damp environments such as bathrooms, kitchens, cellars and rooms in general.
Use: interiors
Tools: brush
Diluition: ready to use
Spreading Rate: See data sheet
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
CAPT-A+ PITTURA VIVA
Class A+ water-based paint for interiors specific for the removal of free organic substances like formaldehyde. The special additives protect the film from the attack of germs, bacteria and molds. Its molecular contents irreversibly eliminates up to 80% of free formaldehyde in the environment within 24 hours of product application, transforming it into stable and harmless compounds. The effectiveness of the product has been certificated and guaranteed by the evaluation test recognized by ISO 16000-23 standard certification, which guarantees a prolonged duration over time that remains active for an estimated time of 5 years, without altering the characteristics of the product. The quantity of formaldehyde, possibly present in the product, will always be lower than the instrumental detection threshold limits and well below the limits established by law. The labeling “A+” (Decree of the French Official Journal of April 19, 2011 ) certifies the product’s utmost respect for the health of people and of the environment, as resulting from the technical report by GFC Chimica The natural action of the silver ions prevents the formation of mold and bacteria and preserves the surface according to the UNI EN ISO 22196:2011 norm method C, as indicated in the results of the test reports: “Escherichia coli and Pseudomonas aeroginosa”. In compliance with the "UNI EN 15457: 2014" standard, the product resists the attack of the following strains of molds: Aspergillus niger, Cladosporium cladosporoides, Alternaria alternata, Penicillium purpurogenum.
Use: interiors
Tools: brush-roller-spray
Diluition: with water
Spreading Rate: 14-16 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
Product code: Chart hues - 302...L
IGIENIX TERMOISOLANTE [being phased out]
Vynilic resins-based emulsion paint, with glass microspheres and special additives to prevent the diffusion of moulds.
Use: interiors
Tools: brush-roller
Diluition: with water
Spreading Rate: 8-10 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
IGIENIX LAVABILE [being phased out]
Washable emulsion paint for indoor use to prevent the formation of moulds. Classified according to UNI:EN 13300:2002 rules (certificate no.225L from 29/07/2014 issued by GFC Chimica Srl in Ferrara).
Use: interiors
Tools: brush-roller
Diluition: with water
Spreading Rate: 12-14 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
IGIENIX TRASPIRANTE [being phased out]
Wall emulsion paint for indoor use with mildew-resistant film. Classified according to UNI:EN 13300:2002 rules (certificate no.226L from 29/07/2014 issued by GFC Chimica Srl in Ferrara).
Use: interiors
Tools: brush-roller
Diluition: with water
Spreading Rate: 10-12 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
IGIENIX [being phased out]
Product for the treatment of moulds with fungicide additives.
Use: exteriors-interiors
Tools: brush
Diluition: ready to use
Spreading Rate: 10-15 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
MUFFABLITZ [being phased out]
Additive for emulsion paints and plastic materials for indoor use, powerful against moulds.
Use: additive
Tools: see technical sheet
Diluition: ready to use
Spreading Rate: 16-18 SQMT. Liters per coat
Attention The information contained in this sheet is considered to be purely indicative. Please, only refer to the attached data sheet. For further details and information, please contact our technical support.
Download data sheet
